No.Yc2Z-7E395-Ac Auto Tran Gear Shifter Cable For Ford Econoline E150 E250 E350

OE Number:YC2Z-7E395-AC/F7UA-7E395-CB/YC2Z-7E395-AB/F7UZ-7E395-CA/YC2Z-7E395-AAFitment For Ford Econoline E150 1997-2004 For Ford Econoline E250 1997-2004 For Ford Econoline E350 1997-2004 ONLY for E40D/4R100 Trasmission Specification of Shift Cable Length: 270cm/106.3" This is a non-OEM product, accessory only! Include 1 x Automatic Transmission Gear Shift Cable Note: This is not oem product, accessory only! Features of Auto Trans Control Lever Cable It's used to connect the gearshift lever and gearbox of the car. The shift cable will worn, stretched, or broken after long time using, affect acceleration, deceleration, parking, reversing and other operations. Signal to Replace Gear Shifter Cable: Stuck in One Gear and won't be move to another gear. Inability to Shift Gears, the gears won't change though the gear shifter be move. Shifter Feels Loose or Floppy, the gear lever may move freely without resistance. No Response When Changing Gears, the transmission won't engage though moved the shifter. Dashboard Gear Indicator Mismatch. e.g., show "D", on "N" Installation 1. Park car, set the parking brake and disconnect the battery. 2. Disconnect the old cable from the transmission. 3. Remove the cable from the vehicle and install the new cable, secure it with clips. 4. Adjust the Cable, Put the shifter in Park (P), ensure the transmission is also in Park. Tighten any adjustment bolts or clips to fits the shifter and transmission. 5. Test, Start the car and test shifting through all gears (P, R, N, D, etc.).