Crankcase Racing Peugeot 103 Sp

Crankcase Peugeot 103 Complete crankcase for mopeds Peugeot 103 SPX, RCX, SP and many others. This MotoForce Racing engine case is specially designed for your Peugeot 103 and is the perfect basis for tuning projects so you can increase the performance of your moped. MotoForce Racing Crankcase 103 – Key Features The MotoForce Racing crankcase offers an affordable solution for building a completely new engine with a high-volume intake system. It comes with an AM6/Derbi-style reed block to improve intake flow and cylinder filling. Two intake manifolds are included (one 15 mm and one 19 mm) allowing for a wide range of setup options. Note: Depending on your build, some modifications may be required: - If you plan to use a different reed valve than the one provided, you may need to modify the crankcase to allow mounting the reed petal retainer plate.- Reed valves specifically designed for AM6 engines such as the VForce 3 reed valve are not fully compatible with this crankcase and may require modification of the mounting holes on the reed block.- Depending on the cylinder you want to install, you may need to trim the first cooling fin on the cylinder base side to avoid interference with the engine mount. We recommend a test fit before final assembly. Scope of delivery housing Peugeot 103 : 1x crankcase left side 1x crankcase right side 1x pair of bearings 1x pair of crankshaft oil seals 1x stop for crankshaft seal 1x intake manifold with 15 mm diameter 1x intake manifold with 19 mm diameter 1x reed valve AM6 / Derbi 1x set of cylinder stud bolts 1x crankcase spacer sleeve 1x engine spring 1x gasket set 1x set of screws